DAP POWER POINT 200 All Purpose Siliconized Acrylic Latex Caulking White

DAP POWER POINT 200 ACRYLIC LATEX CAULK WITH SILICONE is an excellent quality, all purpose caulk designed exclusively for the professional painting contractor. It contains silicone additives for greater flexibility and adhesion and provides a durable, waterproof seal. It is paintable in 30 minutes with latex or oil-based paints, saving time. It won’t shine through or discolor the paint for superior paint finish results. It is easy to apply and tool, low in odor and cleans up easily with water. Cured caulk is mold and mildew resistant. 40 Year. Exceeds ASTM C834. Interior/exterior use.Features & BenefitsPaintable in 30 minutesEasy water clean upExceeds ASTM C83440 year guaranteeProper Surface Preparation is KeyRemove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.Want straight lines?Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.Get a Professional-Looking FinishTo get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.