Tenax Quartz ExtraClean Pro Liter Quart Size

Remove those vacuum rings from your quartz slabs with Extraclean Pro. This 1 quart container of solvent based cleaner is designed for removing greasy suction cup rings from quartz slabs. Extraclean Pro penetrates the pores of the material to remove grease that can make its way into the quartz. These rings can be difficult to remove without a product designed specifically for the purpose of eliminating these kinds of discolorations.SUCTION CUPS & VACUUM RINGSSlab handling equipment makes moving quartz and engineered stone slabs a piece of cake. however, these machines leave their mark on the slab. 1 qt. Extraclean Pro suction cup and vacuum ring remover is made to get into the pores of the slab and remove those unwanted greasy circles that are left by the machines.COVERAGEOne quart of Extraclean Pro covers approximately 200-300 square feet of material.HOW TO USEUsing 1 Quart Extraclean Pro is easy. Just pour the product directly on a clean cloth and rub the remover onto the slab in the location of the ring. For stronger marks you may have to apply Extraclean Pro 1 Quart vacuum ring remover directly to the slab. If applying directly to the slab, distribute the Extraclean Pro evenly with a clean cloth and leave it for 1-2 minutes. After 1 or 3 minutes, rub with the same cloth in a circular motion until the marks are removed. In cases where the problem persists, you may have to reapply with a longer waiting time.STANDARD APPLICATION FOR RING REMOVALPour Extraclean Pro 1 Quart Directly On A Clean, Soft ClothRub the Area of the Stone With the Ring Until the Ring is GoneFOR TOUGHER SUCTION CUP RINGSPour Extraclean Pro 1 Quartz Directly On the SlabDistribute Evenly Over the SlabWait 1 to 2 MinutesWipe Area With the Same ClothFOR PERSISTENT VACUUM RINGSPour Extraclean Pro 1 Quartz Directly On the SlabDistribute Evenly Over the SlabWait Longer Than 1 to 2 MinutesWipe Area With the Same Cloth